Contact your service provider if it is the SIM code otherwise if it is the password you use to gain access, either remember it or factory reset your phone.
The unlocking instruction for Nokia 105 is not very complicated, but you need to remember that you have only 3 tries to enter the codes.
If you enter the codes incorrectly more than 3 times, the code counter might get blocked.
Follow these 5 steps to make your Nokia 105 network free
1. Turn on the phone without any sim card
2. Enter the following sequence (#pw+unlock code+1#) on your NOKIA 105 just like a phone number*
* Characters p, w, + will appear after pressing the *(star) symbol a couple of times
4. Press # at the end to confirm the code
5. Message "SIM restriction OFF" should appear.
Your Nokia 105 is now unlocked !!!
Yes, there is a solution to backup contacts from your broken Nokia 2730c-1.
Before flashing the phone, one option is to try using Nokia Suite software on your computer to connect to the phone and backup the contacts. Another option is to remove the SIM card from the phone and insert it into a different phone to access and backup the contacts. You can also try using third-party software or services that specialize in extracting data from broken phones. It's important to act quickly to ensure you don't lose any important numbers. Good luck!
What do you mean by a 'restriction code'? If it is your password you might have to do a 'factory reset' on your phone.
If it has been locked with the IMEI code you will need to contact your network supplier to get them to unlock the handset.
It sounds like there might be an issue with your Nokia 2720 Flip after trying to edit a contact. Have you tried restarting the phone to see if that resolves the problem? If not, you may need to check if there are any software updates available for your device or contact Nokia customer support for assistance.
My first thought was that the phones doesn't have Bluetooth, but it does.
https://www.gsmarena.com/nokia_n95-1716.php
The key to the code would depend on the make and model of the headphones. Likely to the '0000' or '1111' or similar.
The most common PIN is four zeroes in a row, 0000. Two others you may encounter on some devices are 1111 and 1234. Try entering those when you're prompted for a PIN, starting with 0000, and most of the time, the pairing finishes successfully. If issue persist, proceed with these steps.
Feb 1, 2021
There is No model like Nokia BL -5J...It's batter type...So specify the model correctly.You can get the unlock code from Theunlockspot.com/unlock-your-phone/rs10wp2/ and Unlock it from network lock easily.
Question edited for clarity.You say you HAD a Nokia 106, PAST tense, so you don't have it anymore?The message is telling you that either the person you are messaging no longer has that number or you are contacting a discontinued number.OrYour old phone no longer has an active number or service is suspended...
A hard reset will put it back to Factory Settings wiped clean with no security code.
Unless Anonymous ... it is stolen and PUK Locked / SIM Locked. That is a whole other story. I have the answer for that as well.
Nokia Mobile Sets Secret Codes
Mobile Set: All Nokia Mobile Sets
Use For: Default Security Code.
Code: 12345
Mobile Set: Nokia Mobiles
Use For: Turn On Enhanced Full Rate Codec.
Code: *3370#
Use For: Turn Off Enhanced Full Rate Codec.
Code: *#3370#
Use For: Turn On Half Rate Codec.
Code: *4720#
Use For: Turn Off Half Rate Codec.
Code: *#4720#
Use For: Show Software Version.
Code: *#0000#
Use For: Also For Show Software Version.
Code: *#9999#
Use For: Show IMEI (International Mobile Equipment Identity).
Code: *#06#
Use For: Show Lock Status of Your Nokia Mobile Set.
Code: #pw+1234567890+1#
Use For: Show Lock Status of Your SIM.
Code: #pw+1234567890+4#
Use For: Show Security Code of Your Mobile Phone.
Code: *#2640#
Use For: Reset Game Score And Timer.
Code: *#73#
Samsung Mobile Sets Secret Codes
Mobile Set: All Samsung Mobile Sets
Use For: Show IMEI (International Mobile Equipment Identity).
Code: *#06*
Mobile Set: Samsung 811
Use For: Unlock code / Change roaming code / ID.
Code: 47*869#08#9
Mobile Set: SGH-600 , SGH-2100
Use For: Show Software Version.
Code: *#9999#
Use For: Show Software Version (instructions).
Code: *#0837#
Use For: Show Serial Parameters.
Code: *#0001#
Use For: Activates the smiley when charging.
Code: *#9125#
Use For: Battery status (capacity, voltage, temperature).
Code: *#9998*228#
Use For: Program status.
Code: *#9998*246#
Use For: Change Alarm Buzzer Frequency.
Code: *#9998*289#
Use For: Debug screens.
Code: *#9998*324#
Use For: Watchdog.
Code: *#9998*364#
Use For: EEPROM Error Stack - Use side keys.
Code: *#9998*377#
Use For: Trace Watchdog.
Code: *#9998*427#
Use For: Change LCD contrast - Only with version G60RL01W.
Code: *#9998*523#
Use For: Memory status.
Code: *#9998*636#
Use For: Jig detect.
Code: *#9998*544#
Use For: SIM File Size.
Code: *#9998*746#
Use For: SIM Service Table.
Code: *#9998*77