20 Most Recent Sony Handycam CCD-TR416 Camcorder - Page 2 Questions & Answers

get a cotton buds, moist the tip of the buds with a little 70% alcohol and slightly wipe the tape head. Do not apply too much force, it may damage the head.

Use the link below to transfer video to your Computer using A/V cable and the Video Capture software.
http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&externalId=C428275

u must to chaing that switch

C21:00 means Condensation(dew).remove battery (dc cord) from camera. try to start your camera after 1 or 2hour .if problem not solve contact nearest expert

here you are

can't get tape out of camera

No puedo abrir el compartimento de la cinta

you need to have the head cleaned.

Dear Sharma,
Its an old model and hard to get parts in stock. Do you really want to repair it? If yes, I will try to give you required part/ board.

Its an old model and user manual is available on charge basis.

I have a trv-58 with the same problem. One way is to press play and rewind while in play mode.Getting back to the first of the tape is a chore.

Your camera has problem in take-up reel section. it can be mechanical or electrical problem. Skilled/ qualified technician can understand easily what i said.

There are a variety of things that can go wrong. The process of elimination starts by taking the 2 screws out of the cover and removing. While the compartment is open, push the eject button and observe if there is any motion with gears or not. The main cam gear should rotate a few degrees in one direction and then back. If you see no motion at all then you have problems that are going to require real work. Most often when this is the situation, this main gear, which doubles as the mode switch, is broken and this is a sophisticated repair to replace.

WOW! You've realy got some problems. With this combination of failures I would suggest that you may have gotten envloved in some environmental conditions which have caused differing unrelated symptoms all connected to exposure to moisture. The focus data is communicated through a flexible printed cable to the lens and may have the connector eroded by moisture. Ordinarily a cleaning tape should restore playback if it indeed was able to properly record in the first place (same set of heads in use for both record and playback). If the play and rewind buttons do not function you may have another cable problem. More info could be useful. Good luck, magic seadog

Hello, your camcorder is from 1998 or 1999. Yes it is fixable. Please ask for the price estimate from the technician with best references. If you need more info please advice.

Question edited for clarity, add full 'make model (what it is)'. Question moved from Cars and Trucks category. Searching for your manual keeps bringing up this manual https://www.sony.com/electronics/support/res/manuals/2698/26988801M.pdf Looking at that manual Page 16, it states the battery pack as 'NP-FP50', and that turns up batteries for $15. https://www.google.com/search?q=NP-FP50 ..

If it were worth repairing, as a Sony agent, I would replace all of the capacitors and clean up the board then reset the mechanism and test. Probably too old being 2001 vintage.

Question edited to add full model designation. Question moved from Sony Computers. This doesn't seem to be a very well known model. It is not even listed on their website. https://www.sony.ca/en/electronics/support/cameras-camcorders/manuals/results?query=V569# There are normally two batteries, a small one that just saves memory and runs the operating system, and a larger battery that actually powers the camera. Try contacting Sony direct There is a bit of help here, but not enough. https://www.google.com/search?q=SONY+V569 ..