20 Most Recent
Leisure GRB6CVK Electric Cooker with Ceramic Hob, Black - Page 5 Questions & Answers
My oven says f2 error on my stove what does that mean
F2 indicates thermistor has short-circuited therefore not operational. It does not necessarily imply the thermistor is at fault. The wiring harness might be at cause. A qualified service technician will need to have a look, determine faulty part then replace or repair it.
Lamona 60cm chimney extractor is fused how do l fix it
If your Lamona 60cm chimney extractor is fused and not functioning, here are a few steps you can take to try and fix it:
- Check the power supply: Ensure that the power supply to the extractor hood is working correctly. Check if the fuse in the electrical circuit or the circuit breaker related to the extractor hood has tripped. If it has, reset the breaker or replace the fuse.
- Unplug and wait: If the extractor hood is still not working after checking the power supply, unplug it from the power source and wait a few minutes. This can sometimes help reset the internal components of the hood.
- Examine the control panel: Inspect the control panel of the extractor hood for any visible signs of damage or loose connections. If you notice any loose wires or damaged components, it is advisable to seek professional assistance for repair or replacement.
- Consult the user manual: Refer to the user manual provided with your Lamona 60cm chimney extractor for troubleshooting tips and specific instructions. The manual may have a troubleshooting section that addresses common issues and guides how to resolve them.
- Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Lamona's customer support or contact a technician specializing in appliance repair. They can provide further guidance or arrange for a repair service if necessary.
What is error code 5A6?
Hi,
Hold the clock key for several seconds and it resets the kitchen range.
Thanks for contacting fixya.com
What do I need to do my stove exploded? Hot glass every where help?
You will need to get an appliance engineer in and fit a new glass door panel.
Glass in not a warranty item as it breals if stressed.
If you contact the manufacturer firstly, they might send an engineer to check the door and if the door is warped, replace it free of charge, if you speak to them explaining how dissapointed you are etc.
My Lasko Ceramic Heater is beeping every 5 second, how can i get it to stop?
It sounds like the beeping and flashing issue on your Lasko Ceramic Heater might be related to the clock setting. Here's what you can try:
Unplug the heater for a few minutes to ensure it's completely powered off.
While it's unplugged, try to reset the clock to the correct time by pressing the appropriate buttons on the heater's control panel. You might need to refer to the user manual for specific instructions on setting the clock.
After setting the clock correctly, plug the heater back in and see if the beeping stops.
If the issue persists, it's a good idea to consult the user manual or contact Lasko customer support for further assistance, as there might be a specific sequence of buttons to reset the clock or troubleshoot the problem.
Not finding what you are looking for?