20 Most Recent Leisure GRB6CVK Electric Cooker with Ceramic Hob, Black Questions & Answers

Try hooking the plate with a piece of wire and pull it close to the hole's,then get a strong magnet and put next to the screw holes,it might hold the plate till you get the screws started.

Oven heater element has died. Get the serial numbers etc off the plate on the back or the handbook, go online to appliance spares sites and see if they carry an element. If you don't know how, get a good DIYer or appliance tech to change it. You could get them to check the element for continuity first?

Question edited for clarity, wrong version of duel/dual. Please always include full make model details. That will be the clock if it is an analogue electric clock.. It needs lubrication. Or if it has a rotisserie function, the rotisserie motor is running Or if the dual fuel is pellets, the auger is squeaking. It is all guesses without make model details, but you get the idea. ..

If it's as old as ours the holes the hinge pins locate in have enlarged over time. This makes them sloppy. If you lift the door, is there a lot of up n down movement. Not closing properly will make the coven less efficient. I'm in the process of researching the parts required before Xmas. So we don't have a cooker failure on the big day??

I have the same problem. I think there is a plate with threaded holes behind the panel that the screws screw into, and this plate falls when you remove all 3 screws. But I cannot see any way of getting behind the panel to retrieve this plate. Help!

You main 'fuse' is the breaker. It does have a thermal fuse, but that has a different function. Information and videos that may help, but in questions like this a full make and model number are needed. https://www.google.com/search?q=leisure+cooker+with+2+ovens%2C+fuse ..

The fuse is in your consumer unit. There is no fuse in the cooker itself.

https://www.youtube.com/watch?v=gHi9y5iNAC0

Sounds like fan motor bearings have died. You can likely search for a new fan online.

Replace clock / control