Jabra Original SP200 Bluetooth Visor Speakerphone Black SP200 - Answered Questions & Fixed issues

Go to the link below and select your phone model and follow the prompts to install your Bluetooth headset:

http://www.jabra.com/sites/mobile/na-us/support/pages/pairingguide.aspx

Firstly, try '0000' (four zeros). if it fails, switch to '1234'. If it keeps failing, try '8888'.
Hope one of these codes might suit your needs.
Regards, Carlos

Go to tools or tools and settings. Scroll down to blue tooth setting. Make sure the Bluetooth is on and near you phone, The phone should recognize the bluetooth and will ask if you want to pair them. Just click yes and it should work.

you have to start your Jabra Bluetooth and then on your phone Bluetooth and search when you find your Jabra Bluetooth then click on and pairs

I can offer for you turn on "Youtube" find how resembling some smart phones. Information you'll get adapt for yourself.

Try this bluetooth pairing guide.http://www.jabra.com/support/bluetooth-pairing-guide

i got the same problem. hope sum1 knows whats wrong cuz i dont.

4x 0 is the code

Have you already tried to put your headset in pairing mode first? Anyway, to do it, starting with it turned off, press and hold the on/off button for some 5 seconds, until the indicator light is steadily lit (it will flash as it was being turned on, but don't release the button at that phase). Then, make your phone'sbluetooth application search for new devices. After a while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros);
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Hope you are able to sort your problems out.

I have three extra ear hooks email me [email protected]

After registering the bluetooth device ( in the settings> accessory settings> register bluetooth device) you must then go to the audio options in the settings >accessory settings >audio options and switch the input from do not use to use to the name of your bluetooth to turn on the connection from the bluetooth to your ps3

I charged mine until the light went off

After having the device recognized by the PS3, just go all the way to the right where your friends are listed and select "Start Chat" and select voice chat (it is not necessary to invite anyone into a chat to do this). Go to the little Tool Box for "Chat Settings", then select "Audio Device Settings" and make sure the Jabra BT2080 is selected for Output and Input.

If anything, I found a video that shows you how's it done attached.

I had the same problem. I used a tiny jeweler's screwdriver to push it out from the bottom hole.

usually you would have to fix that from a cell phone

hold down the power button until it flashes red and blue and then your phone will be able to find it. I already had my phone searching for blue tooth devices and then i held the power button down and it worked great. No code was needed with my Iphone

Most factory codes are set to 0000 or 1234, Most are the zeros not the oh's.

How to hard reset KYOCERA DIGNO WX04K WILLCOM

GSM Hosting https://forum.gsmhosting.com > vbb > how-hard-reset... Feb 24, 2016 - Ihave solution turn off mobile than holde both volume keys and connect usb i will install adb drivers and than install kingoroot in pc and ... Missing: DUAL ‎' Show results with: DUAL

How To Do A Hard Reset On Kyocera DIGNO Dual WX04K

Tweakdroid https://tweakdroid.com > hard-reset > kyocera-digno-d... Nov 28, 2021 - To start, go to the Settings menu of your Kyocera DIGNO Dual WX04K; Find the factory data reset option. · Click on Erase all data. ; Turn off the ... ..

You were asked questions? I have been campaigning for this for 3 months. I told them you need a pop-up All questions need 'make model (what it is)' as first 3 words. You are missing the maker, but you do mention 'shredding'. Then I also said 'There are 40,000 categories to choose from'. You chose 'Cell Phones'. and it's not a 'memo', it's a question. :>) So, first of all, disconnect it from the mains for 30 minutes. If you jammed it, you were working it hard, and when it jams, heat builds up in the motor and trips the thermal protection device. They have a thermal cut out, some have a thermal fuse what need physically replacing, but most reset when they cool. Does it work in reverse? A jam can sometimes damage the switch in the throat of the shredder, some are a mechanical switch, some are an infra-red sensor. https://www.google.com/search?q=DM72C ..

how to retrieve my pin code in ran online