20 Most Recent
Canon FS22 Flash Media Camcorder - Page 9 Questions & Answers
My shutter lens on my Cannon FS100 video is stuck
The lens cover mechanism in these cameras is susceptible to debris and requires disassembling the camera to repair. This can be repaired fairly inexpensively. However, it's not a user serviceable problem due to the fact that the camera will need to be partially disassembled and will need to be repaired by a qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.
If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com
Hi, I bought a canon
The lens cover mechanism in these cameras is susceptible to debris and requires disassembling the camera to repair. This can be repaired fairly inexpensively. However, it's not a user serviceable problem due to the fact that the camera will need to be partially disassembled and will need to be repaired by a qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.
If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com
I put the casette in the slot but it will not
Some of the reasons that your cassette is not falling into the tray in the correct order.
1. Possible that the loading arms have been jammed, struck and have not returned to base to be parked in the correct slot. If so there is malfunction of the loading arms, the motor drive or the movement of the arms. you will need to check this out only if you are able to remove the tray and check into the mechanism.
2. Possible that the tray is out of alignment, possible that the tray alignment has changed due to damage in the tray support.
3. Possible there are foreign material within/under the tray that is causing the tray from locking down. Please check with good light inside/under the tray.
4. finally make sure that the cassette is good and is not having any stickers or attachments on its sides.
Clean video head
Your local camera shop will sell you a head cleaner. It looks just like a cassette, but it has brushes inside that brush magnetic particles from your camera's record heads.
My name is Satheesbabu. I
there are several power cords on ebay for your camera as well as new batteries if you need one. Do an ebay search for MV 800 charger, here is an example of one I found. http://cgi.ebay.com/Desktop-Charger-Canon-MV800i-Camcorder-/380317041118?pt=Batteries_Chargers&hash=item588ca981de#ht_3278wt_1141
Where do I find the
there is an data plate with model number and
date of manufacture, usually the SN is on that label. look on the bottom
side, or where the viewer opens. if all else fails, check the manual.
8mm video tape to vhs
If you wish to transfer the 8mm to VHS you will need to connect the camera to a VCR VHS recorder.
Use the red and white audio connectors and yellow for video to connect the two devices.
My Canon ZR60 has developed
Hi
when you experience such problems you should disconnect the battery back and the charger, wait a few minutes and hold the power button down for a moment to drain out any remaining power in the unit. Re attach the battery and if needed connect it to the charger, the unit should turn on, if not, there is a internal hardware problem, in order to get it fixed you will have to find a local camcorder repairer, as I feel its too complex for us to attempt to fix over the internet. And since the electronic parts are so small inside the camcorder all you could really do is replace a board, your going to need professional assistance in repairing the camera.
if you have any additional questions or if you need anything else.
let me know,
Thanks,
Ekse
WHERE CAN I FIND THE
The serial number for the Canon Vixia HFR11 is located on the battery compartment door. It is 12 numeric digits and NO letters. I believe you were on the right track with your first try, but you should leave off the "YG" when entering the serial number.
I own a Canon Digital
This is usually caused by an oxidized or defective Audio/Video drum. You can try running a cleaning tape through the camera. If this does not solve the problem the camera will need to be serviced by a qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.
If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .
Bonjour, mon problème c'est avec une
j'aurai besoin d'un peu plus d'info sur model de camera,et ce que vous tenter de faire
si la camera est debrancher de l'ordi ,et si l'ordi demarre normalement sans la camera,
vous pouver me contacter par email (
[email protected].
ainsi on pourra peut-etre trouver une solution je ne comprend pas les #232, 233
merci sicerement alain.
Not finding what you are looking for?