20 Most Recent Epson Stylus NX300 All-In-One InkJet Printer - Page 9 Questions & Answers

You either used not original manufacturer cartridges or you attempt to refill them with ink, the cartridges have a small chip telling the printer how many pages were printed and how much ink was used. You will need either a device to reset the chips or replace them with original manufacturer ones.

Take it out and shake it!

THE PRINTER NEEDS TO BE RESET,GET THE WIC RESET UTILITY TO CLEAR THE ERROR.

Error lights Stylus inkjet C and D range printers are here Support Downloads Epson Stylus SX235W Epson

The Epson Web Installer application is designed to manage the downloading of the required software components for your Epson Product. Once it is downloaded & launched it will connect to the internet and download the latest driver software for your Epson product; this may include scanner drivers (where applicable), printer drivers and network/WIFI drivers/software. Please Note: depending on the speed of your internet connection, this process may take a while. Once the software is downloaded, it will automatically begin to install. You will be guided (on-screen) through the process. You can download the installer from here and fix your cartridges issue. ftp://download.epson-europe.com/pub/download/3779/epson377970eu.EXE

Depends on what you mean by "reset".If you're referring to the waste ink counters, you can either:

1. Locate a copy of the AdjProg service utility and use that to reset the waste countersNote: Will not work on MacOS or Windows 8... or...
2. Download the WICReset (for windows) or iWIC (for MacOS) and purchase a WICReset key to reset the waste ink counter that way.

Whatever you do, remember that resetting doesn't deal with the waste ink inside the pads so you should be looking at changing the pads (not easy to do yourself) or fitting an external waste ink tank like a printer potty.

If i am not wrong then there is orange lite not yellow. check ink status if all ink is full then check paper may be it stuck in roller.

Need to change the ink pad.

Check the following:

• If the all-in-one is plugged into an outlet on a power strip, try plugging it directly into a wall outlet.
• Make sure the outlet you're using isn't controlled by a timer or wall switch that could be making the outlet inactive.
• Make sure the power cable is securely connected at both ends.

If the issue persists, the hardware itself is malfunctioning and will require service

No go into settings and you can alter the size

r300 printer needs USB cord. You will need to get one.

Access it from your control panel and make changes there.

1. Do one of the following:
   • Windows: Right-click the printer icon in the bottom right corner of your screen (the taskbar) and select Printer Settings. Then click the Maintenance tab.
   • Macintosh: Open the Applications folder, open the EPSON Printer Utility 2, select CX7400 Series, and click OK
2. Click the Ink Cartridge Replacement utility icon and follow the on-screen instructions to replace your ink cartridges as necessary.

The print head is plugged. The cleaning procedure can be found online. Just Google Epson print head cleaning and you'll find a YouTube video on it.

Yes it is. Try here http://tech.epson.com.au/downloads/product.asp

Hold the power button for five seconds