Top 20
Javelin Systems Inc Javelin Viper PC Desktop Questions & Answers
I need to make an
I would have to say yes because the data for your POS can be found
HERE and it says it has a removable hard drive. Unfortunately it's no longer being sold so support is limited.
I'm having trouble with the Javelin J330i printer.
check the feed tires ,the ones that feed the paper/cards into the printer. they maybe slick with paper dust. I recommend taking a cotton dish cloth or rag with some 409 cleaner on it the the feed tires clean all the paper dust off the tires let dry then try to feed card again. sound like the sensor is covered with paper dust, and is giving a false error.
Image quality
sounds like your printer buffer may be running out of memory. Try turning the file into a PDF and printing that instead.
Card does not read
Card readers build up magnrtic particles from the cards they read . u might try cleaning it with a blank card that has a rough surface/ladened with alcohol, or a very small q-tip ladened with alcohol to remove the dirt and magnetic residue. too much built up residue can cause, loss of reading ability, and lost sensitivity between the card and the reader.
Clean install?
use a usb cd drive and set your computer bios to boot from the cd
Como cancelar el winter driver
EnglishIt is a car, and cars are complexbut no car was told , maker, model , and year.we can not guess cars. post the VIN? and all that is knownname a problem what can't your car do right?name symptoms or evidence that is confusing to you.then answers can happen.onlygood luck , finding itand Mucho Gusto.my guess now is this is posted to computer forumand not to CARS !must be some odd traction controls thing'but 10,000 models of cars,
How to resolve your meter when it's on temper mode
Tamper mode means the prepaid meter is in a mode where it does not supply power. Check your meter remote controller (used for recharging units). If it displays a Relay Open symbol, the meter is in tamper mode.
To remove tamper mode requires you contact the distributing company and request a tamper reset token. The tamper reset token is a 20-digit code that clears the meter from tamper mode and restores it to its default state.
My Employer Says They Are Going To Cut My Wages. Can They?
If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired an
employment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut.
They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.
Not finding what you are looking for?
