20 Most Recent Danco Faucet Stem - Page 2 Questions & Answers

Take the shower head off and see if the pressure is better or the same. If it is the same then you will need too look up-stream for blockage in the water lines. If it is better then replace or clean out the holes in the shower head. It may also have a filter screen before the shower head.

The gate or bypass put of the tub spout is not stopping all of the water from coming out of it so that means it is not diverting all of the water to the shower head. The tube spout is not made for rebuilding in most cases but you could take it off and look for some sort of debris that may be causing this to happen.

replace the seats in faucet body -a special wrench is usually required

Sometimes on the stems on the side the handle attaches is a nut that can be tightened. Inside this nut is a rubber or other type of seal. tightening this nut stops the water from coming out of the handle. If the nut has already been tightened then possibly need to replace this rubber seal.