Question about Yamaha FZR 600 Motorcycles
...VOLTAGE REGULATOR, I BET IT IS BELOW 14V. THE FZR IS PRONE TO HAVING THE REGULATOR GO BAD (THE OLDER ONES HAVE NO COOLING FINS AND THEY BURN THEMSELVES UP). THE BEST ONE TO BUY IS THE NEWER VERSION ...
...14v These are not exact voltages, but if there is no rise when the bike is revved, there is a problem with the regulator or stator. Not sure on that particular model, year , but if it cant be seen ...
...problem hook a battery charger to it, and check for spark with the full voltage. a good battery should read at least 12v not running, and rise to 13-14v at around 2000rpm if the regulator is ...
...voltage flowing into the battery, it should not read more that 14V even with the headlights on or off. Use the leads directly on the Battery poles + to + etc. It could also be a faulty Alternator, ...
...voltage while the bike is running. At idle you should get around 13-14v, at 4000 rpm you should get over 14. If you're getting less than 13 your charging system has a problem. Could be a bad voltage ...
Question about Yamaha FZR 600 Motorcycles
...voltage regulator. you need a good battery, on old machines if one light goes out others will burn out also. make sure all of your bulbs are good. but make sure you have a good battery (6 Volts) that ...
...voltage, maybe to around 13.5v to 14v then quickly regulate back down to 13v...regulator is working o.k. The battery could just have a cell going bad in it and not holding the charge... if still not ...
Question about Yamaha FZR 600 Motorcycles
14v the rr is not working, replace with one from a newish cb125.they are more reliable Also with main beam on the lights should get a little brighter when revved, if it gets very bright the voltage is
...voltage up to a higher level (13-14V) it only falls slightly when the lights are turned on again. It then (usually) sinks slowly and lights off-on will (usually) bring it back up again. Does this ...
...voltage at the battery should stabilize at aroun 14V, not 12V. The battery should be at about 12.5 when left overnight. My ST2 will hit 14V at 2k RPM with no lights, 3lk with low beams, 4k
106 questions posted
Usually answered in minutes!
122 Questions
86 Questions
71 Questions
72 Questions
53 Questions