1975 kawasaki Z1B "clutch cable" Questions

...clutch cable to my kawasaki z1b900 i need step by step instructions please To remove the old cable first shorten the mid-cable adjuster to give as much free play as possible. If you need more free ...

Installed clutch cable and now I can't get the clutch to engage.What am I doing wrong 1975 kawaski Z1 Cable is to tight ... loosen it up a little

clutch lever back on. There is a brass bushing in the end of the lever (like where the lead head for a cable would go). That bushing spins inside the lever. That bushing has a hole drilled into it (or

clutch cable adjuster clearance increases with engine temperature, adjust the clutch when the engine is cold. If the clutch is adjusted when the engine is hot, insufficient pushrod clearance can cause

...clutch cable (if not hydraulic clutch) completely (clutch cable adjustment is about 1/2 way down cable. Remove derby cover on primary cover. Looks similar to this: ...

...clutch cable, weakening the clutch lever action until it barely moves the clutch plates. Maintain the clutch lever by ensuring the free play at the lever meets the specifications of the motorcycle's ...

...clutch cable at the handle.Follow the cable down and look for and pinching or damage.If you can follow the end of the cable to the actuall clutch mecaniism, inspect the area for clearance.If you can ...

...clutch cable adjuster. Loosen the cable locknut and turn the adjuster to provide as much cable slack at the clutch lever as possible. Support the bike so that it's sits straight up. Remove the clutch ...

clutch cable adjuster clearance increases with engine temperature, adjust the clutch when the engine is cold. If the clutch is adjusted when the engine is hot, insufficient pushrod clearance can cause

clutch cable if the clutch needs to "grab" more, via the clutch cable adjuster bolts near the crankcase, until there is a small amount of play in the cable. You should be able to move the clutch lever