1975 kawasaki Z1B "adjust motorcycle clutch lining" Questions

Ad

Question about kawasaki Z1B Motorcycles

1 Answer

adjust the new cable, shorten the mid-cable adjuster as much as possible. At the clutch lever, turn the adjuster in and leave about 1/4" of threads showing between the locknut and the lever body. With

Ad

...it's loose idk what I'm missing How to Adjust the Clutch for Katana Motorcycle eHow The clutch cable probably just needs adjustement. I found an article on how to adjust the clutch. Hope this

Ad

Question about kawasaki Z1B Motorcycles

1 Answer

...adjust clutch inside primary case? Because the clutch cable adjuster clearance increases with engine temperature, adjust the clutch when the engine is cold. If the clutch is adjusted when the engine ...

Question about Motorcycles

1 Answer

kawasaki fury 125 need to adjust clutch lining of kawasaki fury 125 THERE IS NOT CLUTCH ADJUSTMENT, ONLY FREEPLAY ADJUSTMENT, IF THE CLUTCH IS TOO WORN IT HAS TO BE REPLACED.

Question about kawasaki Z1B Motorcycles

1 Answer

clutch lining the motorcycle still advances even when im still pressing the shifter down how much slack do you have on the clutch lever ? it should be 3 to 4mm max free play ! also on some bikes there

Question about kawasaki Z1B Motorcycles

2 Answers

...clutch a time or two. Now adjust the cable so that you have between 1/16" and 1/8" of freeplay at the clutch lever. Tighten the cable adjuster locknut and replace rubber boot. Good Luck Kia 99 ...

Question about kawasaki Z1B Motorcycles

1 Answer

...adjust the clutch Because the clutch cable adjuster clearance increases with engine temperature, adjust the clutch when the engine is cold. If the clutch is adjusted when the engine is hot, ...

Question about kawasaki Z1B Motorcycles

1 Answer

...cover back on now my cluth is slipping! but its a new clutch? If it has a Clutch cable check the adjustment. It always need adjusting after putting in new clutch. If it has hydraulic clutch check ...

Question about kawasaki Z1B Motorcycles

1 Answer

2004 VRSCB Clutch My clutch starts activating when the clutch lever is almost out, can it be adjusted, or what are the steps in bleeding the line? There is no release altering adjustment for the VROD ...

Question about kawasaki Z1B Motorcycles

2 Answers

...motorcycle for a test ride. While riding, use your left hand to adjust the barrel adjuster where the cable housing meets the clutch lever, to fine-tune the adjustments made previously. Return to your ...

Not finding what you are looking for?
1975 kawasaki Z1B Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...