Hitachi CP-X201 Projector "display check air flow" Questions

...check the air flow''. what can i do to remove that message? Check Air Flow means that the heat sensor is activated. This message means that the air around the projector is not circulating well... ...

...check air flow, etc. You must go into the menu and reset the air flow item. MAKE SURE YOU CLEAN THE DUST FILTER!! Heat is the number one killer of projectors and Hitachi's run "hot". I clean my ...

...check air flow After 15 minutes from switching the projector on a massege is displyed saying check the air flow, 2 minutes latter the projector turn itself off. I checked and cleaned the air filter ...

display at all. Bulb has around 1800 hours. I waited 10 minute, red status light came on, then I powered it back up, it ran for 20 minutes and shut off. No fans, nothing powered at all. Pretty sure it

lcd projector displays the message check air flow lcd projector Hi.... Clean the filter It will show you in the manual

check the air flow What do I do? Help! Classroom teacher in dire need of help. Hi There Teacher! the air filter unclips on the left hand side, lens facing out. after vacumming out the filter see below

display appears and the projector shuts down in less than 10secs. the source signal never appears. after a few minutes the ready lamp turns green and the lamp indicator turns red This is an indication

...display anything I have this projector mounted to the ceiling of my classroom. It is mounted where the buttons to turn it on and everything are on the bottom. It will periodically turn off, for no ...

...air compressor to rule out a bad fan * pressed the reset button during power up to reset processor. Not exacty sure on the reset sequence. Doesn't look like a heat problem and the warning light does ...