...ABS light (usually yellow/amber). If so, the brake light is related to the emergency brake and the rear calipers aren't done correctly. If no ABS light, the brake light is most likely the ...
Question about Mercury Sable
abs light stays on and brakes are locking up on 2002 mercury sable grand marque what do i need to do to fix it? first you have to find what is causing the brakes to lock up as this can cause the ABS ...
ABS light came on two days ago and I filled up the brake fluid resevoir with dot3 brake fluid today. The light is still on so I think I need to look somewhere else. I need to find the ABS relay for my
...abs light on and stays on what is wrong now OK, the abs light being on will mean that the ABS (Antilock Braking System) is disabled completely. That means, that the front wheels will lock up instead ...
...ABS light when accelerating from a stop Recently, my ABS light has been coming on occasionally when I go from a stop to accelerating. If I release the gas and then push it again, the light goes away. ...
...ABS light comes on what part of the engine is involved. The Anti-Lock Brake system. Check your manual to see if you may experience "temporary failure" of ABS. My '89 RX-7 Turbo would "fail" if brakes ...
Question about Mercury Sable
...of "Park" position without depressing the brakes. -Speed Control will not activate. -Cannot shift the vehicle out of "Park." -ABS Warning light illuminates on vehicles with ABS -Battery
Question about Mercury Sable
...after the anti lock brake light came on. Where should I start looking? check the over load circuit breaker for the lights going out. Run fault codes to find the ABS/ Traction control sensor ...
...ABS light. i once accidently left the parking brake on (or maybe i didn't) but anyways, the brake pads in the rear heated up a bit and i had the light come on, which won't go away. i asked the ...
Question about Mercury Sable
ABS brake lights keep turning on, randomly. They go off after car is turned off/on again. All new brakes installed 6 months ago, and it is not the master cylinder, already checked. run the fault codes
360 questions posted
Usually answered in minutes!
689 Questions
627 Questions
646 Questions
540 Questions
534 Questions