1999 Mercury Mountaineer "rubber boots" Questions

...an indicator for number one cylinder. I can't imagine any reason to put a metal boot rather than a rubber

...very common, open the driver door and take a look at the hinge area, in the middle you will see a rubber boot, inside the boot there are the wires that go inside the door to control the door locks, ...

...mountaineer Spark plug wires just pull off and press back on. Make sure you grasp the wires by the rubber boot only. If you pull the wires by the wires, instead of using the boot, you can break the ...

...rubber boots are removed, use your compressed air source or vacuum to remove as much debris from around the spark plugs as possible. Warning: Wear Eye Protection when using compressed air. Remove the ...

boots rips you loose grease and they start to grind and clicking and brake away. ( recommended to bring to an auto repair shop ) roughly price on drive axles are $125 for the part and 1.5 hours labor.

...another rubber boot sealing the shifter lever to the transmission. It is possible one or both rubber boots are ruptured. Should replace both anyway, if one is. I assume you have a manual

...in the well in the boot around the spare wheel. the plugs in the boot seem perished (cracked rubber...old)...could this be the problem? hi yes that would help but rember they are for you to ...

What's that rubber boot called that fits over the MAF sensor housing? 2002 Nissan Maxima 3.5 It's not the one with all the ridges. It's just a 3 x 1 1/8 x 1/8 rubber boot. Thanks for the help. MAF ...

removing rubber boot for plugs I have a 4 cylinder 1.8 passat wagon 2003 and I need to know how to remove the rubber boot that surrounds the spark plugs. thank you John McPherson just pull the rubber ...

...rubber boot that would deteriorate on the steering box on a 91 honda accord The boot around the the steering shaft or the boots over the inner tie rods. Both can deteriorate. But neither should cause ...