...Tools: 180 to 220 grit sandpaper (or dremel with wire brush attachement), flashlight, paper towel. Optional: dielectric greaseRepair directions: slide under vehicle from the back (I didn't need to ...
Question about Cars & Trucks
...tools i dnt really have much but its striped n I can't use a Philips.. can you get a small dremel tool there and cut a slot, making it so you can fit a flathead screwdriver to the head of that screw? ...
...problems occur on various Chrysler products manufactured since 1986. What I did was remove the computer from the car and then take a Dremel tool with wire brush attachment and lightly buff all the ...
my steering lock does not unlock even when the car is running. what can i do to fix this problem with little money. You can take the plastic covers off the steering column and try to spray light ...
Question about Cars & Trucks
I have a multi max mm20 Drexel tool. It worked great yesterday. Today it quit. Now it will not run at all. It did not seem to be overheated. What to do? What would be your suggestions? Assuming that ...
...dremel tool to remove the plastic from the area that kept melting. No problems since. this is tricky, try to put a 12V bulb (single filament like that of your tail light's) in place of the fuse...now ...
heater hose broke off at firewall.there is a plastic connector which I can't get off. it spins but does'nt back out.how do you remove this connector? There is a removal tool to release plastic locking
dremel tool. Worked like a charm, no more problems. It sounds like it's not the lights but the Ballast http://en.wikipedia.org/wiki/Electrical_ballast. It's commin for them to fliker at first and they
NO I HAVE A LX470 WHEN I PUT THE KEY IN IT TURNS ALL THE WAY OVER WITHOUT MAKING CONTACT.INSIDE THE IGNITION CASING BEHIND THE SWITCH,THE LINKAGE SEEM TO BE BROKEN.How do i repair this problem? The ...
...tools? I had the same problem, remove inner door panel remove plastic, drill or cut rivets that hold winow regulator in place, I used a dremel to remove rivets, replace rivets with 1/4 nuts and bolts ...
386 questions posted
Usually answered in minutes!
81 Questions
62 Questions
36 Questions
5 Questions
2 Questions