2006 Subaru B9 Tribeca "door step lights" Questions

...mounted step board with lights on Mazda tribute 2006 4 wheel dr. connect the lights from the doors to step board I lost all the lights from all 4 doors how can I fix it Check the fuse for door

Step 1: Drivers Door Key Reset. Exit the car with all doors closed and the windows rolled up. ... Step 2: Activate the Key Fob. ... Step 3: Turn the Ignition On. ... Step 4: Remove the Alarm Fuse. ...

...door. Step 3: Insert key into the ignition. Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in ...

...door lock switch • LH outside rearview mirror control switch • Rear radio control head The dome lamps can be disabled by closing the dome lamp defeat switch located on the headlamp and panel dimmer ...

...step 2). 5) While the LED is illuminated : • Open and close the driver's door 2 times. • Turn the key to the ACC position. ? LED will continue illuminating. ? Indicator lights will flash 2 times. ...

...botton down while then at the same time press the lock button three times in a row step 5: door locks should initializ at this point they will lock and unlock on there own to show process is ...

step two. if not wait until it happens again. 2. open each door one at a time and spray the cleaner you have into the latch on the door where it meets to the cab,then blow it dry with air and spry the

...step 3, but the garage door does not operate. 4. Press and hold the trained HomeLink button and observe the indicator light. If the indicator light is solid/continuous, training is complete and your ...

A and B in step 6 as the remote was         not accepted.    C. Repeat steps A and B in step 6 for each new remote.7. Open drivers door