1997 Subaru Outback "great wall replace head light" Questions

...great. Any ideas on how to do a quick fix on this problem? when you replaced the plugs , was one of them (cylinder 1 ) dirty and fouled ? I'm thinking that bad rings in cylinder would give you low ...

...great for about 10 days, and yesterday the coolant began to rise rapidly to the top of the expansion bottle, but did not overflow. Steam was venting from beneath the new radiator cap. The car has an ...

...great about 34-38 highway 28-32 around town Hi. The most common cause that I have found for an " only idle misfire" is low compression. The engine needs at least 100 psi of "dry " compression to idle ...

...great again. it only took about 50 miles to reset, and the sensor cost me $35. People shouldn't guess - they should say "I don't know". As I just replaced my head gasket on my 1995 Plymouth Neon - I ...

...great until another on coming truck pushed a wave of water onto the top of my hood. that's when I started to get the miss. the next day it cleard up and thought no worries. few days later it only ...

...great care not to touch the new replacement halogen bulb as oil from your skin will burn when the bulb is turned on and may damage the glass, shortening the life of the bulb. Use a clean, dry paper ...

...great. Found one other vacuum leak with a pinched o-ring. P0171 code has cleared. Thanks again. Just an off the wall, out of the box thought. Possibly the intake manifold plenum has cracked allowing ...

great. Help please Doubtful. unless it is severely under sized. Make sure it has a full charge, and if you can put a volt meter on it while someone else tries to start it, see how low the voltage goes

...wall is missing or has a cut in it that goes right into the wiring loom if this is what you have replace the gromit and tape the **** out of the wire then wrap it in an old bicycle inner tube inner ...

...wall side or bumper side..im hoping bumber side for easy access. what to look for and change when i take the head cover off?? and or any diagram of such would be great!! thank you.. tom gustafson ok ...