1995 Plymouth Voyager "type compressor oil used" Questions

...compressor shaft bolt (Fig. 13). If necessary, a band-type oil filter wrench or a strap wrench can be placed around the clutch plate to aid in bolt removal. (9) Tap the clutch plate lightly with a ...

...all, compressors use a medium weight oil specially designated, "compressor oil" and is available at all CHAIN-type auto parts stores, AND usually at most independent auto parts stores. Good

... where the hose assy bolts on Have to know how much is in the condensor,accumulator, evaporator also Can not just load up the compressor with oil Has to be the correct type oil & the correct ...

compressor type of torque fluid used in sullair 185Q air compressor contact sullair for this as the correct oil is essential for good performance. You may find the information on the web under sullair

compressor as the type of oil used in the compressor should be listed on this label and NEVER use a different type of oil then the one listed as the oils are NOT mixable. The amount of oil is depndent

...compressor parts. The oil is added in the Freon Low pressure port and the oil is available separately or mixed with Freon. There are different weights of this oil just like motor oil and you should ...

...type oil I assume your installing a new compressor & dumping whatever came with it to be sure it has the correct oil in it Don't have any info for you,this is just a chat room nothing to do with ...

...type of frezon gas do i use in my 1998 320 bmw (japanesse) and there is also a tickin noise when i turn the compressor on, could this mean that is also needs oil? Freon is not used. It should be ...

...Type Use a new oil pan gasket. Tighten the bolts, in the sequence shown, to 18 ft. lbs. (25 Nm). Tighten the pan-to-transmission bolts to 33 ft. lbs. (45 Nm). Tighten the access cover bolt to 89 inch ...

...Compressor and needs to know the type of oil and how much to use. it should be r134, when you buy the oil (coolant) from the parts store they can look up you car and let you know how many lbs. to put ...