...brake light in your rear window, that gets its power directly from the brake switch. It does not go thru the signal switch first. So, if you are having a brake light problem, and your fuses are good, ...
Question about Subaru Legacy
how to fix rear steering problems. there is a sideways shimmie at low speed turning thought it was front. replaced bushes and mounts. seems to be right rear if it is **** brakes could be hub assembly
Question about Subaru Legacy
brake pads replaced. The rotors and hardware were fine. I noticed that the driver side rear was not releasing as the wheel was very hot and the gas millege was being affected. I had the pins lubed and
Question about Subaru Legacy
...Rear light problems When I press Brake the lights go off and when Im driving The brake light are on. Also the reversing beeper is on all the time No solution got but am trying to get wiring diagram ...
...rear bumper saying GT. If you dont see this you probably have the L series. hi you can tell if you got abs by looking at the axles they will have teeth on them also you will have sensor located above ...
...brake ? there could also be a issue in the rear differential ( gears and bearings ). the one thing that I would check is the wheel bearings themselves -- if the bearing pack has split, what you are ...
also said won't even roll backwards when in neutral thanks poss. transmission issue or problem with rear brakes if drum operated. does it roll frontwards
Question about Subaru Legacy
replaced rear hub assembly and got er55 on odometer and abs light I replaced the rear passenger side hub assembly and after driving the car a few miles the ABS light came on and the tripmeter read ER ...
problems with the hub will still roll with the clutch in??? soak in oil for a couple of days then place a wooden block against wheel rim and hit with 7kg lump hammer ,but you must soak it first around
Question about Subaru Legacy
...rear axles This a fairly simple task,you're going to need a set of roll punchs to remove the pins that hold the axles to the differential.You need to remove the large nut(32 or 36mm) that holds the ...
163 questions posted
Usually answered in minutes!
447 Questions
411 Questions
381 Questions
317 Questions
328 Questions