...gear each head, but is still a 2 cams per head, engine if belt has broke or you have turned any gear you must remove rocker covers to check positions of camshafts front lobes are in certain spot as ...
...gear shift in the floor moves when this happens as well. So if I stop at like 30mph and up kind of abruptly, sometimes I can't always feel the shift forward, but when I go to release the brake ...
...2.Remove original speedometer driven gear and inspect for damaged teeth. If damaged, follow service procedure # 2. If it is not damaged, replace the (yellow) 24 tooth driven gear with the (blue) 20 ...
Question about Toyota Cars & Trucks
...gear clutch is not working properly; 2. The possible reasons why the reverse gear cannot be driven are: the overdrive clutch, overdrive one-way clutch, low reverse brake or direct gear clutch is not ...
...timing on a 1995 Buick 3.8L This is a chain and sprocket driven cam on this engine and the timing will be set at 0 degrees when the 2 dots are in line with eachother from the cam gear to the crank ...
Question about Cars & Trucks
...gear marks after removing heads replaced heads after machine shop valve job. There are two (2) valve cam shafts for each head and are cam to cam driven by gears. I need to make sure the cams are in ...
...driven in 4low for almost 150 miles. It is now sluggish and is not shifting gears very well. Hi Initially nothing will be done, this is for a long period of time, effecftively when you have 4 wheel ...
...gear. yes s-10 have chain instead of belt and thats the problem these cars have most of them are noisy in the beginig, most of the time is the tensor that goes bad If its a 6 cylinder yes there is a ...
Question about Isuzu Trooper
...2 chain several sprocket gears the whole works Your best bet is to do a search on YouTube. 1995 Plymouth voyager has a timing belt, not a chain. Also water pump is driven off the belt, so change that ...
Question about Cars & Trucks
2 marks on the injector pump with the 22 degree mark on the flywheel if the pump is gear driven you will have corresponding timing marks on the idle gear and the crank gear the degrees on the flywheel
279 questions posted
Usually answered in minutes!
480 Questions
463 Questions
423 Questions
323 Questions
317 Questions