...starter & alternator (it was refurbished). Found out it was ignition. A friend ran wire & put in toggle switch for ignition. Now I'm in alaska (-21) started up, then stalled. Went to start again & as ...
...STARTER HOUSING AND BOLT UP USING THE SECOND MOUNTING HOLE,IF DRILLING OUT BROKEN STUDS IS TOO PROBLEMATIC the problem will be finding a housing to fit correctly and make contact with the flywheel ...
starter cracked from housing starter broke away from the housing it was attached to. replace the starter
housing on top. Checked old starter. is fine. put in and loosened fly wheel to restart attempt and rule out transmission. Broke of bell housing again. Could I be putting the starter in wrong? Not much
...starter housing breakage in 2001 windstar Within last 8 months we have replaced the starter 2 times and had to have the flywheel replaced. Last week while attempting to crank the van, the starter ...
...housing for the starter bolt? on the starter or the block? a block can be welded with a cast iron rod..its hard to do and sometimes may not hold long..the aluminum nose on the starter can be changed ...
...AT THE STARTER There ar? no conectors. On started there ar? just the studs coming Out. If you mean the housing unit. Get one from junk yard. If is the cables going in to the stared. Replace the
...starter from trying to tilt up and break. Another thing that can break the nose is an ignition cross-fire. that can shock the housing and also give you that problem. Make sure the ignition wires are ...
starter is broke which is not turning the wheel? Im not sure but If u can help me at all or have any suggestions please email me. Thanks alot sounds like the starter, i dont think its siezed the motor
housing broke on original starter and I replaced with a new one, I am still getting alot of grinding noise when the starter engages... I have tried numerous shim combinations with no luck. I inspected
30 questions posted
Usually answered in minutes!
107 Questions
105 Questions
39 Questions
42 Questions
37 Questions