1999 Ford Taurus "escape heater fan working" Questions

...heater fan is working but no heat is comming out. Thank you for you help. when you replaced all of that stuff on the vehicle did you make sure that you don't have a vapor lock in the highest ...

...heater core. It has a new Temperature Switch, the relay tested okay, but the cooling fans don't seem to be operating. What else could this possibly be? It's happening after short distance driving, ...

Engine Cooling problem 999 Ford Taurus 6 cyl Engine Cooling problem 1999 Ford Taurus 6 cyl Front Wheel Drive Automatic 117675 miles I've been doing extensive work with my 1999 Ford Taurus 3.0L Vulcan ...

...heater is on high heat. One trick for getting the T stat to open without an air bind is to turn the engine off as soon as the temp approaches the opening point (195 (f)) then re-starting it in about ...

...Escape Limited- Air/Heat stopped working in all 4 speeds- Dad replaced resistor and it still does not work. Help! This has been an ongoing problem that is fixed because it suddenly starts working ...

heater fan does not work in setting 1 and 2.... my heater fan however, does work on speeds 3 and 4. you need a blower resister

HI MY 2006 FORD ESCAPE 3 SPEED HEATER FAN STOPPED WORKING Does the high setting work? If so, you have a bad resistor. you ccould check the fuse box and see if the fuse has blown

...heater fan, will only work on high 03 ford escape This is a common issue with most vehicles. The blower motor uses a resistor to control the fan speeds. Once the resisters burn out, making them ...

escape. The heater blower works i can hear it but little to nothing cones out of the vents. motor might stil be good but fan is prob burnt up. remove glove box and components and turn heater on to see

heater is working , with no fault lights on . Flames are on . Inside controller is old mercury type switch could be broken ducting letting hot air escape or on the intake side drawing too much outside