2004 Ford Freestar "tools needs change brake pads" Questions

Ad

Question about Ford Freestar

1 Answer

...change axle Front drive axle?If you have to ask,then maybe you need a repair shopYou can do that a home, if you have the tools & years ofautomotive experienceOnce the front of the vehcile is ...

Ad

...change the position of the tie rod end, this could slightly affect front end alignment. 10th. push the cv shaft from the brake side/outside of the steering knuckle through the wheel hub. You may need ...

Ad

Question about Ford Freestar

4 Answers

...tools a C-clamp would be good as for the back your going to need to rent a Brake Caliper Piston Tool that pushes the piston in and turns at the same time. And as for the light on the dash board that ...

Question about Ford Freestar

1 Answer

...change rear brake pads on my 2003 T&C, what special tools or knowledge do I need before starting? just like any other disc bake job colapse pistons replace pads just standard hand tools will do ...

Question about Ford Freestar

1 Answer

...change the front brakes on a 2001 BMW Z3 3.0...any special tools required for that? I've done lots of brake jobs, but never on a beamer...thanks! NOPE NO SPECIAL TOOLS JUST REMOVE BRAKE PAD WEAR ...

Question about Ford Freestar

1 Answer

...brake callipers? To change pads you need to use a rear brake pads changing tool to screw in the calliper piston or if you are experienced enough you could screw in the calliper with a two mm thick ...

Question about Ford Freestar

2 Answers

change brake pads and I cannot release the old ones...do I need a tool or what? front or back? dics work with screw type piston,suggest release hand brake and screw back pistons by using a screwdriver

Question about Ford Freestar

1 Answer

...tools are need to change the pads the front pads are pretty straight forward,just a c clamp is sufficient to press the calibers,make sure the brake fluid reservoir cap is off when you do them..just ...

Question about Ford Freestar

1 Answer

tools needed to chang front pads brake pad tool to compress the piston remove the cap from your master cylinder. when piston is pushed in and you need brake fluid.

TOOLS ARE NEEDE TO REPLACE AUDI A3 SPORTSBACK FRONT BRAKE PADS For front brake pads replacement you need only usually wrench set, inclusive 7 mm allen key also. But for rear brake pads replacement you

Not finding what you are looking for?
2004 Ford Freestar Logo

1,841 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...