2004 Ford Freestar "change rear brake pads type" Questions

...rear brake pads on our 2004 ford freestar and could not locate the correct tool for turning the piston back to its home postion. I was told to use a pair of vice grips and this would allow for the ...

...rear wheels. I know this is common sense and redundant, but once you have a vehicle either roll, or slip while you are lifting it. Or worse, move of a jack or stands while you are underneath you ...

...rear pads gone and disc damaged!! Unfortunatly this is normal, nothing can be done about it. Get pads checked every 15,000 miles to save discs. The electronic parking brake on s type is prone to ...

...and brake pads on the rear of the car. The right rear bled fine, but the left rear won't bleed. When I drive the car, it's as if I have no brakes. Please help!! keep pumping the brakes .it will bled

...rear disc parking brake system. Is parking brake operated by rear caliper? If so, is there a special procedure for moving the piston inward when replacing the brake pads? Parking brake is operated by ...

...brake pads on the rear and the caliper on the left rear. I bled the right rear fine, but the left rear won't bleed. Am I missing something? Please Help. you still have alot of air in the lines.or you ...

change rear pads how do i open brake calipers to change rear pads. the piston seems stuck. There is a special tool required for this job. It expands a plate between the piston and caliper but also has

...rear brakes. New pads on back, but brake light and ABS still on. Is there a proportioning valve or something that could be malfunctioning? more like the master brake cylinder which is a tandem type ...

...rear, when caliper is also used as emergency brake. I generally use the inner brake pad to protect the piston from damage while compressing it. If it does not retract it may be frozen or the rubber ...

...change the pads the front pads are pretty straight forward,just a c clamp is sufficient to press the calibers,make sure the brake fluid reservoir cap is off when you do them..just unbolt the calibers ...