...350 motor has no spark or power to the distributor I have a 78 GMC/Chevy 1/2 ton 4x4 pickup with a 350 motor that cranks but wont fire. I searched around with a test lite and everything seems to have ...
...350 distributor wiring diagram and firing order Engine runs rough after plug wires were replaced The firing order is 1-8-4-3-6-5-7-2. The distributor rotates in a clockwise direction. The engine must ...
...distributor assembly. Check the red lead wire to the HEI for voltage, there should be 12 volts. It common for the ICM to fail on the HEI system and if you go to Auto Zone, they can give you the step ...
...Replace with new sensor and reattached the wire and you are home free. If I forgot something or I can be of further help feel free to call or email me. Either way, please rank my advice so I can ...
distributor (including the reluctor coil, cap, rotor and ecm) I had recently replaced the coil, plugs and wires. It has spark, fuel, and compression Im lost. You first need to check the fuel pressure,
...350 c10 chevy truck.i have fireing order but not shure where wires go.if you could sem me email that would be great. Hey fishernash4, Viewed from above, front of vehicle at the bottom, cylinder ...
350 the problem that i have is that the truck died while driving it started to backfire when i would accelarate then the engine died no spark to the plugs, i have replaced the distributor the coil and
...replace the distributor cap on my 1990 chevy silverado, and was diligent to replace the plugwires in the correct order, howver the truck does not turn over and makes a poping or growing sound when ...
...replace the distributor cap and rotor. ( Note if you have any doubt of the condition of the rotor or the cap replace them.) Next lets check your spark plug wires. Lets pull off one of the spark plug ...
350 questions posted
Usually answered in minutes!
584 Questions
420 Questions
403 Questions
331 Questions
284 Questions