2004 Chevrolet Tracker "change belt" Questions

Need to change surpentine belt on 1991 geo tracker. I have the belt but unsure how to go about changing Loosen steering pump loosen alternator bracket change belt belt tension should be 22 LB

i have changed all the pulleys except for my A/C pulley on my 2002 chevy tracker 2.0 liter engine. The serpentine belt has been changed at least 8 times over the last 5 years. i changed to pulleys in ...

...the belt is a mark on the top gear there is a mark or arrow align them up if the belt is just being changed and has not gone out of time as long as you don't turn the engine or any pulleys or gears ...

...change the power steering/ac belt It should have a 1/2 inch hole on the tensioner to put in a 1/2 inch breaker bar. Relieve the tension and remove the belt. Be careful, its heavy spring loaded. Make ...

belt, very thick, long and 1 piece then you don"t loosen the A/C unit to replace the belt, you"ll need a wrench to move the tension pully to install thebelt. Let your local repair shop change the belt

...belt change out? or valve lash or , no matter it's all here. this is the G16B engine, this full timing belt page, is here. and has link to actual FSM ...

While it is not specific to your Tracker, it is a good video step by step overview which will help you a lot. http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904

...change the serpentine belt on my 1999 chevy tracker First, keep this diagram around as you will need it to route the serpentine belt when you reinstall it. There may also be a diagram under the hood ...

how to change belts how to change engine belts accessory? http://www.fixkick.com/belts.html cam http://www.fixkick.com/t-belt/tbelt-index.html

...change the serpentine belt ALL serpentine belts have a tension pulley which holds the belt tight to the various equipment it turns (water pump, alternator, a/c compressor, etc). Find the one spot ...