2000 Pontiac Montana "reset oil light" Questions

Oil Light is on need to Reset it. Don't have manaual. Do you mean the "Oil" light or the "Oil Life System" light? . If the oil light is on, you need to stop operating the engine and have it checked to

...light start on for a few moments. What can I do? did you try to reset oil life system to see if light goes out at next start up if it does your system was not reset properly at yuor last oil ...

oil light to reset the change oil light first you turn the ignition on without starting the vehicle wait till all buzzers stop then you depress the excellerator pedal three times and release now start

reset change oil light check your owners manual under oil change or some variation of that.  other wise. try this.  turn your key to the on position but do not start the car.  next ...

...five seconds. The CHANGE ENGINE OIL light should flash. Turn the ignition OFF, then start the vehicle. If the CHANGE ENGINE OIL message comes back on, the monitor has not reset. Repeat the

...light showing an oil can with a wrench under the oil can mean This means your vehicle is due for a regular maintenance visit to the dealership. Light is yellow as caution. The light comes on at ...

...oil in the information box then you turn the ignition switch on, push the gas pedal down fully 3 times, turn the ign off. Then start the car and if it does not come on, then it has been reset. ...

...5000k on oil change it may not have been reset at last oil change key on run motor off depressed gas pedal to floor 3 times within 5 seconds of key on run then start motor to re set oil life ...

how do you reset the oil change light Engine off, key turn to run position, press throttle to floor three times. Light should flash and it will be reset.

change oil light soon stays on If you already changed the oil, then push the reset button.