1997 Pontiac Grand Am "bcm" Questions

..., GM has had switch problems for sure . The starting of your vehicle is computer controlled by the BCM - body control module . The ignition switch could be sending a wrong input to the BCM ,causing ...

...the service engine light in that the service vehicle light has to do with the body control module,(BCM).You have to get the codes read for the BCM and any other module with the scan tool.I`m not

How do I replace the BCM in a 2002 Pontiac Grand Am? I think the BCM in my 2002 Pontiac Grand Am is going. The security light is on if I start with the key (The remote start bypasses it so that ...

...but start it immediately. 4. This should reset your Passlock system. The other issue is that the BCM harness is known to corrode and will cause the passlock to fail and will lead to a no start. ...

...Circuit Description By using a feature called inadvertent power control, the body control module (BCM) supplies power to all of the following components: • The courtesy lamps • The dome lamps • The ...

body control module location i need to know where the bcm is located on my 96 3.1L grand am the location of the bcm is at the passenger side glove box area

My bcm went in my 2001 grand am 4 banger. I put one in from the scrap yard and tried the 10 min on 30 sec off thing 3 times and nothing. My radio says locked across the screen and the theft light on ...

came on on the dash what does this mean YOU CAR SECURITY THEFT DETERENT MODE KICKED IN MEANING YOUR BCM OR IGNITION KEY AND SWITCH IS WORN WHERE THE BCM AND PCM DONT RECOGNIZE THEM.THINKING THE CAR IS

...based due to rain. I thought I had rid myself of all these problems I was having when I replaced my bcm and shrink wrapped it because the one I had was corroded and destroyed from water erosion ...

...front door with the key from the outside before I could get out. Is this a fuse problem or what? BCM problem BCM= Body Control ...