ecotec The timing chain on my 2005 cavalier 2.2 ecotec is ratteling against a guide. Does it just need a timing chain set or are the camshafts going to need to be replaced?Or is something else causing
...complicated than it really is! Let me know if u have any questions. countrycurt0 Is this the 2.2L ecotec engine? If so you really should buy the socket for the oil filter before we get
Question about Opel Cars & Trucks
...timing belt on my 2002 1.6 ecotec opel astra cde. i got the timing belt marks wrong . how must the cam pulley marks be when i got the crank on tdc please. remove the rocker cover and look on the ends ...
Question about Cars & Trucks
...ecotec timing marks are on the cover and inside the cam cover. lower timing marks are on the pulley and on the crank. this should line up with the sump case marking on crank and the pin on the engine ...
Question about Chevrolet Cavalier
.But mark it anyway and always rotate the engine 360% by hand to make sure the valves clear and you have it right I need help. opel 16v ecotec motor.. help with cam timing.. how should the cams be set
Question about Chevrolet Cavalier
...setting timing chain Lloyd; sounds like vacuum leak, i use starter fluid (CAREFULLY)to locate vacuum leaks. Also on the 2.2 ecotec fuel dirty stuck injectors can do this, while car is running, give a ...
Question about Chevrolet Cavalier
2004 Oldsmobile Alero 2.2 Ecotec. Where is the location of the camshaft position sensor on it please? Question edited for clarity. Question moved to model category. Check out the videos, links and ...
...setting" an Aircon working now:-) Bad news is now have spanner warning on dash, ECU code reads P2106 (210670 accelerator/brake trick.) Now when driving with aircon engine a little sluggish. When I ...
Question about Cars & Trucks
torgue settings 1600 16 valve ecotec engine sylinderhead settings Sorry I haven't the tightening torques for your engine to hand but for several years I have noticed they are included with the ...
Question about Pontiac Cars & Trucks
...ecotec 2.2 This vehicle does not have a cam sensor .The ICM provides a synthesized cam signal to the PCM based on these inputs. The PCM uses the cam signal to synchronize fuel injection. The ...
770 questions posted
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,438 Questions
1,339 Questions