1986 Nissan Pulsar "wire stereo truck" Questions

...i have a manual for the car stereo but not for my car so i have no idea what colours go into what wires in my car. I have a 1985 nissan pulsar milano. Hope someone can help Do you have a test

...stereo. This wire must be taped off to prevent shorting. The fuse is probably burned. Because your car is foreign, I cannot access the wire colors or fuse numbers. The fuse in question is usually ...

1998 pulsar radio wiring what are you trying to acomplish? cutting the factory wiring harness to put it a new stereo is not the answer. they sell adapter plugs that will save alot of hastle. ...

diagram WHAT TYPE OF DIAGRAM?????????? WIRING. Engine. G/Box etc Let me know Ron Hi there Ron, I am after a Wiring Diagram for a 1988 Nissan Pulsar Vector Ti 1988 as I am putting in a new stereo into ...

truck? You must first disconnect the battery cables. Then you begin work from the driver's side with a 4-corners screwdriver, palm-type and 6-inch long. Remove the screws holding the speedometer. Open

...car this is activate when you start the car. Nissan Pulsar 2016 Automatic smart start Someone has wired something wrong there. Maybe during a stereo or alarm install. This is not a factory

I have a 998cc nissan micra 3 door 1999 T-reg. My interior just turned off the other day, and now a lot of things have stopped working. My speedo, fuel guage and temp guage are all on 0 all the time. ...

...might be after reading these symptoms? even if it looks okay its not okay. do a tune up on plugs, wires, if needed oil change, air filter FUEL FILTER VERY ditributor rotor, cap. ...

...wire of the stereo. The black wire goes to the black wire. If the truck doesn't have a black wire, connect the black wire from the stereo to a bolt on the frame of the dash. The orange wire from ...

...truck 2 the stereo The stereo side of the wires should be labeled. Check out the12volt.com for a wiring schematic for the truck side. I advise against cutting and splicing wires for a stereo ...