1996 Buick Century "remove door panel" Questions

remove a door panel on the rear door of a 2004 Buick Century. Where can I get instructions and what tools are needed? you need a philips screw driver and maybe a cpl or torx drivers.first remove the p

Remove passenger side front door panel The door panel is held in place mostly by clips. There will also be screws securing the panel. The screws are usually located in the door handle/the arm rest ...

...remove the door panels. Pry out along the edges until the door retainers pop out then remove the screws in the arm rest and also by the handle. Once the panel is loose you will have to remove the rod ...

...door. Remove the interior trim panel. Remove the water deflector. Tape the window to door frame to prevent it from moving. Remove the three front door window regulator motor screws. Disconnect the ...

...door panel. I've removed the screws and the triangle piece, but I still need help with the panel. Thanks Rach Once you have removed the door handle and all the trim try wedging a flat chisel between ...

...remove the screw behind the door panel. where you place your hand to pull the door closed there is a small plastic cover in the bottom lift this out and there are two bolts under there, remove them. ...

remove the door panel and find out exactly what is wrong, the motor is a gear reduction unit and even if the motor works it may still not drive the output gear. The door panel is held on by screws and

...First remove all the door handles and switches, then take a lg. flat screwdriver, and stick it between the panel and metal door,and pop off all the clips, then peel off the paper and you can see

...door panel needs to be removed to determine which parts are bad. 2) "No sounds at all when pressing window switch": A burnt out motor or bad window switch. Inner door panel needs to be removed. ...

remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them.