...brake pedal several times ,now hold the pedal down, start the engine the brake pedal should move down a little , brake booster ok. release brake then apply light pressure to brake pedal and hold , if ...
...brake pedal insside the car. On the foot brake their is a switch that when you press the brake pedal down it then opens the switch making the lights come on. Now the problem could be that this switch ...
pedal operates a cable, linkage, or if it is hydraulic and uses a brake line. (It sounds like a cable is broken) no, there is no cheap option for clutch work as it could be (if hydraulic) a bad master
...brake pedal height, and see if pulling up on the pedal gets rid of the brake lights staying on. Maybe the lines have to be bled to get rid of air in the brake lines. Or, the rear brakes should be ...
brake pedal in. It's located behind the brake pedal in the upper part, and it has a connector with 2 cables. Push the brake pedal in and where it sits that's the brake switch. The plastic part
with the brake pedal, check that the pedal return spring is not broken, or the switch mounting is not bent or loose and the pedal comes back and closes the switch. Brake light pedal switch sticking on
wires come from the left hand corner above the emer brake pedal. Plugged in lights on ,,out lights off. Then have the unit tested. or replace. If there was ever a power surge the caps could have blown
Question about Cars & Trucks
BRAKE pedAL to return far enough to trip switch? stuck on before and after, very good evidence, rarely told. ever see it work right before or buy car broken like this??????? history matters huge as do
...brake pedal stays smooth, but the sound and thumping gets a lot worse. Wheel is also very hot. When putting my hand above the tire in the wheel-well it feels like an oven. I don't think this is safe ...
608 questions posted
Usually answered in minutes!
921 Questions
813 Questions
785 Questions
797 Questions
687 Questions
