Question about BMW 750
...remove the "TRACK TRIM" from the front seat of my Honda Ridgeline. I need to get under the seat to install my seat covers. check for screws or caps covering screws in the plastic trim.if there aren't ...
...plastic between the door and the seat - part number 1L2Z-7862187-BAC see if this helps Remove the rear trim screw. Remove the lower trim screw. Release the side trim front retaining clip. Pull the ...
...Remove plastic cover (6 plastic clips) Remove bolts (8or9) holding motor cover Lift front of cover up (motor should be upright at this point) There is a line on the white plastic reservoir that ...
...remove the headrests to put seat covers on for a 1989 crown victoria? 90% of head rests just pull out. the others will have a button where the headrest goes into the seat. If yours doesn't have the ...
...Remove the back panel of the seat, there are 5 or 6 plastic clips that hold the seat back cover on, start at the bottom of the seat back panel and work your way upwards, pull the panel downwards and ...
...plastic screw clips then remove four 10mm nuts lift sunroof glass out of car remove cover and screws from rearview mirror all plastic trims around headliner move pass seat forward most and flip back ...
...Remove the plastic caps covering the legs and the bolts into the body once you remove plastic covers caps you will be able to see the bolts clearly, carpeting might be camouflaging both sides. And on ...
...plastic cover, about 1 1/8" diameter, on the base of the post on each side. You can remove it with a screw driver by carefully prising upwards at the edge. They just clip down. Once these are lifted ...
...remove the plastic covers from rear side of the seat.If its hard to remove,use a screw driver to pry the cover. The slide covers fitted with bolts.remove those bolts by socket wrench.once bolts are ...
...remove the little plastic covers on the back side (same place on the frame as the front) you might be able to shake it out but if not there is a couple of wires that you need to unplug one is 16 pin ...
441 questions posted
Usually answered in minutes!