tumbles no heat i have cabrio gas dryer about 1 .5 yrs old no heat sensing light stays on Replace the radiant sensor
Question about Whirlpool Dryers
...dryer should go first to the Sensing position and then on to Wet (or something else), but it is not doing this. Help! if the heat is only staying on for a few seconds and cutting out the vent line ...
...dryer does nothing. Changed the heating element a few weeks back. Now this -There are couple things that cause a dryer no to work: -Thermal fuse, heater element, door switch, start switch. Good luck ...
Question about LG Dryers
...dryer wasn't heating and I cleaned out very clogged vent. Now that works but the flow sense light is still staying on? Take vent off back of your dryer and dry a load. See if flow sense goes off. If ...
dryer when i open the door and the senseing light never changes to anything but senseing how can i fix this The E-1 error code is a thermistor error, some problem with the variable resistance.....this
dryer? If so, there has to be either a pilot light, or an ignitor. If it has a pilot light, make sure that it is lit. If it isn't, the gas will not flow. The sensing bulb above the pilot light must be
dryer will not heat. In the Status display sensing light does not move thru the cycle not sure of your question?
...dryer when I open the door so I know it has power. replaced thermal cutoff fuse and 2 heating ?s outside (both screw into the side of) the heating element canister. What can be next? The door switch ...
Question about Frigidaire Westinghouse Electrolux Dryers
gas oven not stayiong lit. Lights up then goes out gas lighting but then goes out within seconds Gas appliances all have a little probe/sensor (thermocouple) that senses the heat. The pilot flame will
44 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
215 Questions
