Tomtom ONE 3rd Edition GPS "screws" Questions

TomTom 0ne I have a new battery but cannot open the TomTom. I have removed the 4 screws on the back. Are there more screws? Barry There are 4 screws: 1. Remove front bezel 2. unscrew 4 small screws (1

...source a new speaker & replace it. once the outer case is off, the speaker is hed on by a couple of screws & will unplug from the board. ( one of the easiest things to replace! ) Unfortunatley if it ...

...third edition and change the battery you will need a # 8 and a # 6 torx bit. Remove the 4 # 8 torx screws on the back of your tt. After removing the screws carefully insert a guitar pic between the ...

...for my tomtom one, but I cannot seem to be able to open up the sat nav. I have taken all the screws out the back, but I cannot get into the casing, please could someone help. Thanks. :-) After ...

disassemble tomtom xl How do i disassemble my tomtom xl. I have removed the 4 screws but i cannot get it apart. Hello, once you have taken the 4 screws apart, the back cover is attached to the front ...

Battery charged up and TOM TOM does not power on Also what type of screw driver head to remove back cover from the sat vav Tom Tom 1 Its a TORX screwdriver T-8 i think

password locked Take out the battery, remove screws from rear, locate small hole reset button & while batteries are out, press it in for a few seconds... should clear and return to factory ...

...and details to my email address: jfox100 at hotmail dot com. Also, i've removed the four torqs screws from the back of hte device, but i cant get the tomtom to come apart? whats the trick to ...

i would like to upgrade my gps tomtom to be truck frindly Is the suction mount the problem? I drilled a hole thu mine, and used a sheet metal screw to mount it to a disk glued to the dash. So far so ...

...for the battery to have failed. More likely something else is wrong . Anyway , ere goes : Take 4 screws out of back of tomtom ( these are star screws so you will need a special tool but sometimes ...