Jenn-Air JMC9158AA Convection Microwave Oven "open door sounds running" Questions

open the door? what can i do about it? After the cook time ends it keeps running and heating until the door is open, Then when i close the door it start running until open again. Sounds like a problem

...open the door. Is this bad? Not sure if its worth fixing or just pitch it. Dont run it with the door open....The microwave are not good for you...You have an interlock switch problem...They can be ...

...door open After the microwave has finished cooking and shuts off, I push the spring loaded button to open the door and the microwave starts running again with the door open. (lights, turntable ...

...door is open because the microwaves are dangerous to humans outside the unit.  The door and cabinet contain the microwaves when it is operating correctly. THE CONTACT ON THE OVEN IS STUCK IN, ...

...open the door. My JE 1860 microwave's fan/light starts working when I open the door, giving me the impression that it is actually microwaving with the door open. Is this potentially dangerous? How do ...

...door open. When plugged back in, allows the resetting of clock, but once door is closed it starts buzzing and running again. Will not cease via control buttons. Please advise and thank you for your ...

...open the door while it is running, arcing occurs on the little contacts and they eventually burn. When they cannot make contact, the oven doesn't know if the door is closed or not. Forget what YOU ...

...door open not much more to it. If you open it, it runs. If you use it and when it is finished, you open the door, it runs. It doesn't matter how much we hit start, We've unplugged it, ...

...door switch. It is on the hairy edge and small vibrations when running cause it to open, as in when you open the door. Moving the door resets it. It must be opened up and the switches

...DOOR OPEN This is a bad door switch. You need an ohm meter to prove that the bad switch is 'opening' and 'closing' when it is supposed to. Sounds like the secondary interlock switch is stuck 'closed' ...