KitchenAid Architect ® Series II KBFC42FTS Stainless Steel "handle frig door" Questions

...handle. Remove these little covers with a small flathead screwdriver. Now remove the screws holding the freezer and refrigerator handles on. Now pop the screw hole covers on the side of the ...

...handle are loose on my GE frig. Can anyone help me? Not sure whether to remove the handle cover (is it in three sections?) or try another ay to remove and tighten. Help, please! Called and watched ...

...handle is loose and I can?t determine how to disassemble the door components to get to the screws. easy, get the model number from inside the frig. go to sears .com put your model number in and you ...

...handle included in the depth dimension? no. depth is measured from the back of the box to the front of the box but does not include the handles. The depth of the cabinet is used to determine if the ...

...HANDLE ON DOOR, BUT NO WATER. COULD IT BE SWITCH! HOW DO I REPLACE SWITCH! Solenoid should be near bottom rear of frig. check wiring connections on solenoid. Turn off water valve to frig, disconnect ...

...frig to the garage. I cannot get it through the door. I need to remove the door handles to get it through the door but cannot see any way to remove the handles. Frigidaire FRS26ZNH Side by Side. You ...

...handle and closing clip for the freezer compartment of my Neff K4664 but unfortunately cannot work out how to attach them to the door. Any help with instructions on how to do this would be great. ...

...frig. Handles must come off. How do the handles come off? your best bet is going to be to take the doors off its usually very easy 3 screws on top and 2 on bottom of each of them sometimes u can take ...

...Frig model number 106.9555752. Would prefer a site to download or read the manual on how to do this. Hi!! To remove the door handles on your unit, all you need to do is remove the handle end caps ...

...frig are useless. There are no adjustment screws that can change the position of the door handles. They are in a fixed position and can only be tightened or loosened. YOu didnt include a model number ...