EnGenius EOC-3220 (EOC3220) "telnet" Questions

...conectados Alguien sabe que comando se puede usar para ver los clientes conectados al AP mediante telnet. Busybox v1.00 After logging into the EOC-3220 with Telnet, enter: cat ...

I can not telnet diet.microsec.in 6013 port. So please solve the problem. just go to the router or modem in that port forwarding or virtual server option is there in that put ur port number and ip ...

...ip in your browser and see if the device has a web page. AP7220 has a CLI. To access the CLI you Telnet to the IP Address of the AP7220. If the AP7220 has a default config, the default IP address ...

...light(s) to go steady red. If your AP has a console port you should be good to go..if you have to telnet or use the GUI then the set your computer to 10.0.0.X and create an Adhoc network to gain ...

...settings are correct: baud rate 57600, 8 bits, no parity, 1 stop bit, no flow control. telnet terminal ID ANSIW. The full directions are here: ...

...g off setting. Problem persists in any mode (WDS, AP/client). Changing turbo setting to static (via telnet) adds 1 mbps at most. There a no other wireless networks or other wireless devices in the ...

Cannot communicate with the access point, no info is sent back via telnet or any other method. I had my friend who sets up networks for a living try for 3 hours to set it up with no luck. He said ...

...to upgrade again but using a different method other than web configuration. Perhaps you can try a telnet session to 192.168.1.1 or the default which is 192.168.40.1 or the IP add you have set it to ...

...since it's working fine im not trying to find out anymore. the default password is working too on telnet and others but it still dont work on http page and i dont see any configuration that ...

where do i set the password to do telnet onto the APs Microsoft's site goes into detail with telnet, http://technet.microsoft.com/en-us/library/cc787407%28WS.10%29.aspx