Sony DVP-NC85H Multi-disc DVD Player "remote blue ray stopped working" Questions

...blue ray bdp_350 no picture or sound just onscreen message saying out off range it as been used on another sony tv and worked ok.cannot reset to factory defaults because no pic or sound every thing ...

...blue ray without a remote Hi, On fornt of the player you have the buttons for opreation.You can use these buttons to operate your DVD player with out remote. I have attached a image for your BD-P1600 ...

...blue screen. I plugged the unit to normal yellow video connector of a 20 inch TV and I configured the output HDMI to monitor but the player continues to stop displaying and hang when getting to ...

...blue this morning my remote stopped working. It won't turn the player on or off. I've replaced the batteries and I know the player is getting a signal because when I push any of the buttons the ...

...blue ray player Follow this procedure to lock and unlock the disc tray. IMPORTANT: This procedure will only work while a disc is inserted in the player and when the disc is playing. While a disc is ...

remote and now the screen only shows "PROGRESSIVE SCAN MODE" in white letters on a blue background. I have tried the menu button but it does nothing. The Audio of the DVD is playing, I just don't have

...remote Remove any DVDs from the disc player. You should be in Blue Screen mode on the TV...If it says "Progressive Scan Mode" ....make sure there is no DVD in it...close the disc changer and push and ...

...blue screen. I found in the manual on page 13 bottom, that if you PRESS STOP buttom for 5 seconds of your remote controller then you can see the picture on the interlaced mode again on your TV. ...

...Blue Ray remote stopped working. I have replaced the batteries several times, but it does not work. Check whether the remote is sending a signal by using a digital camera, still or video. While ...

...blue light in the display coming from the remote front. if no light: try other batteries again note the battery polarity. no light= controller broken. if there is light= the remote is working. try to ...