Mr. Heater Thermocouple "thermocoupler looks" Questions

does'nt work the pilot light is on but the gas is not coming The most likely problem is a bad thermocouple. Pilot-equipped appliances have a thermocouple to make sure the pilot is lit before turning ...

pilot won't stay lit when button is released Thermocoupler is dirty or needs replaced. The thermocoupler is the copper looking tube that runs along the pilot tube. The flame has to hit the ...

pilot lites and stays on, but goes off when you turn it to on. Burner won't lite It sounds like the thermocouple for that heater powers both the pilot valve coil and the main burner valve coil. Either

this is regarding my Rinnai gas heater Model 1260 S.When On button is pressed, it burns and glows the plate but when released , Gas stopped and it turns off. problem is proberly the thermocouple burnt

pilot assembly parts or thermocouples I have about 10 heaters most of which have been miss used. I am looking for thermocouples or the whole pilot assembly. where can i find parts? Hardware store ...

Is there any DYI VIDEOS ON HOW TO REPLACE THE THERMOCOUPLE ON AN EVERDURE 15mj gas room heater please Live in perth cleaned the heater inside and out still won't stay light when you take your finger ...

all pro spc-85 looking for thermocoupler for the all pro spc-85 going through the backplate to the nozzle location is the thermocouple. it is a copper like tube that sits back from the actual flame. ...

reznor model# f125 pilot won't stay lit. i reznor model# f125 pilot won't stay lit. i changed the thermocouple already. Make sure the pilot is clean (Blue flame fully enveloping the top portion of the

i have a propane reddi heater and I can't get it to stay on after I light it, it won't stay on. Is there something that needs to be cleaned or replaced Generally speaking a propane heater stays lite ...