Akai PDP4294 42 in. EDTV-Ready Plasma Television "replace c524" Questions

televsion wont turn on the light is orange when it should be red power supply (BN96-00249A) or C524=C525 (0.22uF/400V mylar) might have to replace one of those.

...c524 was blown and rattling around. it has the P0.22K400 written on it. also the corner, top right of the board the plug looked cracked,so i bent the pins back and fixed the crack. i might have to ...

...replace the associated Power Correction IC - IR2109 or could the problem be the replacement MOSNFET's? Any ideas would be appreciated. I have the same problem with a samsung power board in a hyaundai ...

C524 and C523 were discolored but they checked OK on my cap meter and also my ohm meter, however while I was inside the set after removing 1 million scews I decided to replace them anyway. I hope that

Samsung Plasma Display HPN5039 Same problem as Vladislav, tv went black but power is still available as you can hear sound from the cable station. Should be call a tech? Vladislav was able to fix his ...

...make sure that the uf and volts match up and you will be fine. I repaired my power board today. I replaced the same caps. There's two of them. Mine said Shin Shin P224K 400. Same thing. They are ...

...is fine. Is there a way to check the various outputs to ensure the PS is at fault before I order a replacement PS board? Regards Tim You can get the schematics for the bn96 00249a smps here in pdf ...

Power Supply Card Replacement Will Samsung's BN96-00249A power supply card work as a replacement for an AKAI's PDP4294 (which was manufactured by Samsung for them)? Remove the back cover. The switch ...

...the problem and fix. I can confirm Vladislav/ Jaime867's repair... Had the same problem on mine. Replaced the same two capacitors and bingo back in action. I think the issue is that the