Question about Hoover Washing Machines
machine off when the load is unbalanced. My guess is that: This switch is being triggered too easily The springs holding the bowl up are either stretched or one is broken; The machine may not be level
unbalanced---but, it is not. My hubby would like to take the drum off---but, doesn't know where to begin. Back panel is off---should we be approaching from the "front"??? The top will come off easily
...unbalanced very easily. Do you know where we can get one? Model # LA5530XSN2 Serial # C84204314 Stock # LA55305 to get a parts breakdown of this go to sears.com go to upper far right hand side click ...
Unbalanced load Error Code OE Condition Drain error Error Code FE Condition Water overflow error Often this is a motor error. Easily fixed by replacing motor position sensor also know as 'hall' sensor
Unbalanced Load Problem husband overloaded my machine and it went out of balance, banged around and shook the whole house. Now it still works, but it is loud, and now there is water on the floor ...
Question about Washing Machines
easily from side to side and front to back by hand, but it may have always been that way. It doesn't shake when the tub is empty spinning, but with a few items or a full tub, it shakes wildly. It is a
Question about Washing Machines
...gets noisy and stops on the spin cycle it is likely the sensor switch is the place to start. The sensor switch is designed to shut down the machine in the event something is wrong - unbalanced load, ...
Question about Maytag Washing Machines
...unbalanced load is in it. I checked the concrete ring at the top (as was suggested by one answer from Kelly) and tried to lift the tub to see whether a nut had come loose and the concrete ring seems ...
...unbalanced loads then these items will wear out. They can be easily replaced for $80-100 for the set if purchased from a mail-order parts supplier. Finally There is also springs that hold the washer ...
...gets to the spin cycle it wobles and shakes very noisy as if there was an unbalanced blanket in. If i push the drum around I can pusj it to any side easily, i.e. it is not stiff. Could it be that ...
152 questions posted
Usually answered in minutes!
99 Questions
66 Questions
56 Questions
46 Questions
40 Questions