Question about Frigidaire Freezers
upright freezer motor does not turn on. I thaw out the ice completely, plug in the power, then the motor turn on. Does this mean there is problem with the motor, or the Ice build up inside the freezer
...upright Frigidaire freezer keeps icing over. took the inside back off, and defrosted it. the drain seems to be plugged, no water will drain down into it. pour some hot water in the drain if this does ...
Question about Freezers
...upright freezer has a sheet of ice in bottom at drain--why? Our Whirlpool upright freezer (EV250NXRQ03) has a sheet of ice in bottom at drain. We used a hair dryer 3 weeks ago to thaw ice there, but ...
upright freezer wasn't freezing things any longer. I found there was ice on the bottom and the back panel was cracked all the way along the bottom with ice in the crack. Can this be fixed by repairing
...upright-problem is i keep getting ice formation on top of door, what causes this & how to prevent? it might have an insulation problem from the factory. or it could have a door seal problem. if it is ...
...Upright freezer model EV171NYMS04 purchased in 2004. We have ice build up on the inside bottom of the unit under the bottom basket. It was high enough to freeze the basket in place. The water is ...
Ice keeps forming on the bottom of my freezer Your kemore self defrost is not working. 1. clean the ice and look for the heater element and your lemi switch.
...upright freezer. I'm defrosting at this moment and the middle shelf was practically frost free. The top & bottom are COVERED with frost, ice. Any advice to help prevent that? That is normal. The ...
...upright freezer keeps frosting up at the top with several inches of frost. It is a manual defrost freezer. Any suggestions? check your door seal, by closing the door on a strip of newspaper all round ...
...KEEP EVERYTHING FROZEN FOR 2 WEEKS NOW BUT THE ALARM WILL NOT SHUT OFF. THIS IS A KENMORE UPRIGHT AT LEAST 15 YEARS OLD Use a freezer thermometer and tell me the actual temperature. Or at least store ...
2 questions posted
Usually answered in minutes!
