FreeMotion Tt30 Incline Trainer "treadmill slows down stepped" Questions

treadmill slows suddenly and when i step off it starts again. only happens to me. hi it sounds like the belt is too loose, i had the same problem when the wife uses the treadmill works perfect, untill

slows down upon walking. Unit powers on, belt runs, speed can be adjusted, but once you step on the belt to walk it either stops or slows down drastically. Step off and unit speeds back up. Check both

...slows down when someone steps on the belt or when the treadmill operates normally for a given period of time with someone on the belt then abruptly begins to slow down. The only certain way to test ...

...treadmill it slows down so much it sticks a little and goes Go to your local hard ware store and purchase silicone spray. Apply Lubricant by lifting one side of the running belt spray contents length ...

...slows down when someone steps on thebelt or when the treadmill operates normally for a given period of timewith someone on the belt then abruptly begins to slow down.There are four typical causes for ...

treadmill slows down when i step on it it runs ok when turning on it's own but as soon as we step on it it slows down. the belt on the motor looks ok and tight. the belt that we run on is well

...treadmill 2007 version 1. Motor slows down after stepping on the treadmill belt. 2. Motor speeds up after stepping off the treadmill belt. 3. Motor emits a constant audible ticking or clicking sound ...

...treadmill operates well with someone of 140 lbs, but 190 lbs+ it won't go past the speed of 5. If I step off, it will speed up to the speed requested, but once I step on, it starts to slow down ...

...slows down to crawl. What make/model is the treadmill? What speed does this behavior occur? Does the walking belt slip, while the motor and rollers continue to turn? If the walking belt is slipping ...

PROFORM RUNS BUT WHEN I STEP ON IT EITHER SLOWS DOWN OR STOPS MOVING AT ALL Belt needs tensioning up on its adjusters or the motor drive gear has come loose and needs tightening back up.