LG LMV1813ST Microwave Oven "blow causes fuse" Questions

...blow the fuse quickly after I installed a new fuse. The microwave is 7 years old. Note that this is an over the oven microwave. Two sons that live with us have a very bad habit of cooking on high on ...

...fuse will blow. If the line fuse blows, the microwave won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace ...

...fuse to blow in my microwave oven? Keeps blowing fuse. I Check the high voltage rectifier diode and was found to be open both way. I notice that when I changed the fuse, I connected the unit to the ...

...fuse blows every time your Electrolux microwave starts up. It sounds like it could be an issue within the control panel, capacitor, or circuit breaker. Because it could be a number of any one of ...

My Danby microwave model dmw111KSSDD stopped working altogether. It kept blowing my fuse, but would work again when I reset it. Now, nothing. Could it be the microwave fuse? It was having issues and ...

...extra, replace it and see what happens..if it doesn't blow again, you're most likely ok, if not, there are more causes for the internal fuse to blow, beyond the interlocks, it's not going to be

...fuse to blow in my Emerson microwave oven? When turning on unit, the fuse blows. Can you give me a list of things, to look for, that can go wrong, when the fuse blows, a blown fuse is a dead short of ...

my ge profile microwave keeps blowing its fuse. i my ge profile microwave keeps blowing its fuse. i have replaced it several time and have increased the size to 30 v but it still blows. where shal i ...

fuse to blow. This may be a bad Magnetron tube or a shorted winding in the transformer. Price for the repair may be too close to the price for a new oven, so check with a repair center before deciding

...CAUSES FUSE TO BLOW WHEN DOOR OPENS. I CHANGED IT AND SAME THING HAPPENS OVER AND OVER. The monitor switch is likely causing the fuse to blow because one of the other switches is stuck in the closed ...