...neck or on the main board (you would need to resolder and/or clean the contact pins), possibly a problem with the colour decoder or related components (bad soldering, faulty components). You can find ...
...colour apearance to it the picture appear to have a "cartoon" like appearance to it and when i change channels the screen is red, i have tried all the settings but no difference The video ...
...colour will be predominent on the screen. These cathodes are fed voltages from the video output stage of your Tv. This stage can be located at the neck of the picture tube itself, as a card pluged ...
Question about Sony Televison & Video
...colour on the screen hello my fellow electronics tech. it seems that you know something about electronics. i would check the color transistors on the circuit board on the back of the crt neck. i ...
...colour went green is your complaint. It is due to the video output stage of your TV. The fault mainly occur in the picture tube base board card. Loose or bad solderings ara always noted. There are ...
...neck of the picture tube. They are Red_Green_and Blue. In your Tv green catode is not emitting any light. Take the voltages of the other two cathodes Red and Blue. Compare this voltage to the voltage ...
...board plughed directly to the neck of the picture tube, where the fault is. Unplug that board from the picture tube. Care must be taken not to break the neck while pulling it out. Never make any ...
Question about Loewe Televison & Video
...board that connects to the neck of the tube may be bad. Without model number information it is very difficult so say further. Some picture tubes can be re-jeuvenated with the appropriate machine ( at ...
Question about Panasonic Televison & Video
...neck of tube with screwdriver handle if pic flashes or goes predominately1 colour you are looking at the tube with internal short. If this is the case there are ways of trying to get rid of the ...
Question about Sony Televison & Video
...colour on tv missing Check the collector voltage of blue output transistor at its video output board, which can be located directly plugged onto the neck of the picture tube. Check for any loose ...
76 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions