RCA D52W20 52" Rear Projection HDTV-Ready Television "tube tv input" Questions

...TV receiver to each component video input (both component 1 and component 2) - got sound but no picture. Connected DVD to each component video input - again, sound but no picture. Tried different ...

...TV off and found that when something was plugged in there the only tube that was working was the green one. The red and blue where not working. Whenever I plug something into my other inputs ...

...TV with a vac or air compressor? Thanks! You have a bad picture tube, no way to sugar coat this one, Sony had issues with all 3 tubes in your model set, more bad news, that green tube is "no longer ...

...problem that make the tube to be off. so don't rush conclusions and get to the end to save the tv with out replacing the red tube, but if all was done and nothing then the tv needs the tube

...input a signal of any type you get a green picture. All other tubes are lit but they're all weak. I checked and found no bad connections. I know it's not a cable problem because the same signal will ...

...tv, and then the screen blinked and the color went bad. I took off the back cover and the middle tube, the green, was not working. I checked the fused I could find and checked connections, but I am ...

...Tube TV 32AF45 Picture Squeeze in middle It just happen to my 3 year old Toshiba Tube TV. The screen become squeeze in the middle part. There are no screen picture adjusting screw or control for ...

...tv I would on the model listed first go to a video input that is not used and look to see if line is there-----this model is prone to bad picture tubes but that usually gives diagonal lines that can ...

...tube where the glow is suppose to be. If you do have the glow the problem could be much more complicated. Another to check is to see if the menu comes up on the screen. You could possibly be in the ...

...TV? Should display under the DVI input setting. Use input/source button on your remote to cycle thru inputs. Hope this helps To fix it, just turn the set off, let it discharge for a few hours. Reach ...