RCA D52W20 52" Rear Projection HDTV-Ready Television "change video signal tv" Questions

...use the video button to select item "68 - AG1", use the adjust button to change the setting to 0, then press the enter button to store the change. Good Luck, big IRISH. PS; Adjust this

...Change the T1,T2, etc settings until the closed caption for your signal appears. If this doesn't work, try connecting analog video or VHF channel 3 (or other specified channel) to the TV. check CC. ...

...audio button to select "video chroma" adjustments, use the video button to select item "40 - AGIW", use the adjust button to change the setting to 0, then press the enter button to store the

...change the input on the TV to pick up the signal of the unit, on the remote or TV itself, there with be a(n) "input", "source", "tv/video", or "video source" button that you can choose the same input ...

...change to s-video, video-1 or video -2 you should be able to scroll down on the tv 's channel buttons to get to the s-video, video 1 ect. inputs. there may also be a video/aux/source button on the tv ...

video inputs work. I used to repair televisions back in the days of tubes, but have not touched any TV in years. What next? I started back in the day of tubes. A family would have one set and it would

...change the video source: Through the on-screen menu controlled by your remote Through the on-screen menu accessed through the Menu button on your TV's front panel Through the TV/Video, TV/Component, ...

signal level problem. If you still have a blue screen and are feeding audio and video seperately in could be a cableing problem. If not there may be a video input menu item that was changed. You would

video. So makes me think it's the TV tuner inside the TV. Help me please...reference to parts to fix or a receiver that has an RGB component out so I can keep the HD signal from the antenna to the TV.

...video input but not when connected to CH3 (CH4) then the tuner of the TV may be defective ? see if you can use the VCR to change channel using the VCR remote. Be sure to vote/rate me if this helped ...