Question about Leisure Kitchen Ranges
...door back to the oven I could not because the 2 small plates onto which the screws where attached had fallen behind the oven front panel (they were held by the screws). I unscrewed the 4 screws ...
...front left of the cooker just behind the door there is a black button. Push this button and hold it in, then press the cancel button and hold both for about 30 secs. If you have doen everything ...
...arrangment? Help Its a Accubake RF378LXKS model with 4 coil elements. Help!!! there may be 2 screws on the rear/behind of the cooker top or on the front underneath the top when top oven door is
...front control panel off to change the membrain switch. Hi have a nice day F2 - E0 Oven temp too high 1. Test operation of door lock on self-clean 2. Test relay contact operation 3. High resistance in ...
...front edge of the cook top. You will need to open the oven door to see them. Remove these screws and the top should lift up. If the range is not equipped with any kind of hinge supports, the top will ...
...front left burner works. The repairman has to replace a EOC on the back of the control panel and another one in the back on the bottom. The total cost for parts alone is $438 then add in the service ...
door doesn?t shut correctly any longer. This is usually caused by bending the hinges or springs coming loose. 3. Remove the oven racks, and remove the oven pan. (There are usually two screws either in
2 questions posted
Usually answered in minutes!
35 Questions